Capital City Banjo Build
-
1. Introduction (11:52)
-
2. Parts (16:46)
-
3. Making the Neck Billet (19:59)
-
4. Cutting The Headstock Angle (14:59)
-
5. Truss Rod/Carbon Fiber Rod (9:13)
-
6. Fretboard Design (20:59)
-
7. Shaping The Fretboard (15:10)
-
8. Gluing On The Fretboard (15:17)
-
9. Peghead Overlay (27:02)
-
10. Frailing Scoop (9:14)
-
11. Drawing The Neck Profile (9:15)
-
12. Rough Cutting The Neck Profile (4:34)
-
13. Overhead Neck Rough Cut (8:51)
-
14. Neck Edge Clean-Up (18:23)
-
15. Fretboard Inlay (40:39)
-
16. Drilling Headstock Tuning Peg Holes (7:18)
-
17. Peghead Overlay Inlay (18:58)
-
18. Fretboard Side Dot Markers (5:02)
-
19. Back of Headstock Shaping (5:23)
-
20. Neck Carving Vise Apparatus (5:14)
-
21. Neck Carving/Shaping - Part 1 (19:49)
-
22. Neck Carving/Shaping - Part 2 (9:27)
-
23. Drilling the 5th String Tuning Peg Hole (9:06)
-
24. Rim/Steam Bending Overview (16:27)
-
25. Making The Rim Forms (25:09)
-
26. Rim Strips/Steam Bending (12:30)
-
27. Gluing Up The 3-Ply Rim (27:52)
-
28. Truing Up The Rim (13:11)
-
29. Making The Rim Cap (22:12)
-
30. Tone Ring Fitment (13:58)
-
31. Drilling Rim Bolt Holes and Dowel Stick Hole (19:22)
-
32. Final Rim Preparation For Staining (4:56)
-
33. Staining/Sealing The Rim (25:06)
-
34. Rim Bolts, Tone Ring, Flesh Hoop Install (9:34)
-
35. Goat Skin Head Staining/Mounting (19:28)
-
36. The Dowel Stick (17:38)
-
37. Heel Shaping Jig (15:57)
-
38. Shaping The Heel (19:47)
-
39. Dowel Stick Hole/Attachment (19:59)
-
40. Installing Frets (17:49)
-
41. Brass Frailing Scoop Overlay - Part I (32:27)
-
42. Brass Frailing Scoop Overlay - Part II (13:10)
-
43. Dry Fit Neck/Pot Assembly (12:40)
-
44. Staining/Sealing The Neck (19:56)
-
45. Final Neck/Pot Assembly (9:03)
-
46. Making a Nut (16:27)
-
47. Installing Strings 1 through 4 (8:03)
-
48. 5th String Nut and Sth String Install (13:24)
-
49. General Set-Up Troubleshooting and Final Words (5:57)
